JRC 1800CP Radar and Chartplotter including GPS112 Sensor

.
The RADAR1800 is a 2kW transmitter with a low noise receiving circuit which provides equal performance to other 4kw radar models.

6.5"inch Bright Color TFT LCD display,
Viewable in sunlight.

It also is a Plotter with a digital electronic
chart system, using C-MAP NT micro charts,
capable of worldwide standard chart.
Plotter picture and Radar picture can
be viewed together on a split screen.
 
 

RADAR Function
• High-definition 6.5 inch Color TFT LCD display
• 1.5 foot diameter antenna
• 2kW peak output with power saver
• Low noise Amplifier receiver.
• Auto Tune
• On-screen target trail
• 1/8 to 24-mile range
• Range cursor
• 1/3 radius offset backwards for Quick Look-Ahead
• Dual IF Bandwidth
• 10-meter antenna cable provided, 15 and 20 meters available optionally.
• 10.2-16VDC, <50W
Plotter Function
•  projection to 85 degrees latitude
• 1/1,000 to 1/100,000 scale
• Memory capacity: 10,000 points total
• with selectable Mark types
• Destination marks: 100 points
• Route plan: 10 routes
• Screen width scaling
• Chart data selectable C-MAP NT micro C-card.
• Tide graph and Port service guide by C-MAP NT micro C-card.
• NMEA 0183 compatible for Nav-Data: Vessel Position; Target Range;
• Bearing; Lat/Lon; Speed & Course; Relative, Magnetic & True Readout
• of Bearing Lines and Waypoint
• Input sentences GGA, RMC, GLL, VTG, MTW, HDT, HDG, HDM, VWR, VWT, MVW, DBT, DPT.
• Output sentences GPGGA, INRMB, GPRMC, GPGLL, GPVTG, INAPB, IIAPB, INBWC INBOD, INXTE,
 

  INMTW, RAOSD, RARSD.
• Memory Backup using C-MAP NT 1MB USER card.
• Memory Backup and Edit Waypoint & Route using Personal computer.
• 10.2-16VDC operation, <25W

 


 

RADAR1800  comes with the GPS 112 Receiver for Chart Plotter function.
The DGPS212 is optional.
One NMEA connector 6-282-5PG-300K is included with 1800.


 

Model Type
GPS112 GPS sensor Receiver
GPS212 DGPS sensor Receiver